Can I Upload Rcp File to Autodesk 360

Insert an indexed bespeak cloud file into a Revit project or convert a raw format point cloud file to the .rcp and .rcs indexed formats.

An .rcp format file is a projection file that groups together multiple .rcs browse files. The issue of indexing a raw format file is an .rcp file and 1 or more than .rcs files.

Note: You tin use Autodesk® ReCap to convert scan file data to a indicate deject format that tin can be viewed and edited in other products. Revit automatically uses this engineering for indexing when y'all insert a raw format point cloud file into a project. For more information on Autodesk Epitomize, visit Autodesk Recap Aid.

1. Open the Revit project.
2. Click Insert tab Link panel (Bespeak Cloud).
3. Specify the file or files to link, equally follows:
   • For Await in, navigate to the location of the file(s).
   • For Files of type, select one of the following options:
     • Indicate Cloud Projects (*.rcp): Option an indexed point cloud project file with .rcp extension. An .rcp is an aggregation of multiple .rcs signal cloud files.
     • Point Clouds (*.rcs): Pick an indexed point cloud file with .rcs extension.
     • Raw formats: Pick a file with an extension in the listing to automatically launch an indexer application that will convert the raw file to an indexed file.

       Notation: Later the indexed file is created, you must use the Signal Cloud tool again to insert the file.

     • All Files: Option a file with any extension.
   • For File name, select the file(s) or specify the file proper noun(south).

     Tip: Press the Ctrl or Shift key to select multiple files. For raw format files, selecting multiple files is an efficient way of indexing several files in a batch process.

4. For Positioning, select:
   • Auto - Centre to Center: Revit places the eye of the point cloud bounding box at the heart of the bounding box of the model. If most of the model is not visible, this center bespeak may not be visible in the current view. To brand the indicate visible in the current view, set the zoom to Zoom View to Fit. This function centers the view on the Revit model.
   • Auto - Origin to Origin: Revit places the point cloud'due south world origin, i.due east., (0,0,0) signal, at the Revit project origin that can be seen as a projection base bespeak in the site programme. If your Projection N is rotated, Revit will also rotate the point cloud so that the point deject's n direction (0,1,0) maps to the current Projection North. It makes sense to apply this selection if your signal deject is sampled with respect to the known indicate and known direction in your model or on your site. Notation that if you lot use the "Origin to Origin" option to insert a point cloud that is stored with respect to a geographical/surveyor coordinate system, it is likely that the cloud will brandish very far away from the rest of the model.
   • Auto - By Shared Coordinates: Revit assumes that the coordinates in the bespeak cloud file are specified in the shared coordinate system used in your model. As a result, the point cloud origin will be placed at the origin of the shared coordinates that tin be accessed through the Survey Base Point. The point cloud will be oriented so that the north direction in the deject file (0,i,0) will be mapped to the True North of the Revit model.

     Annotation: By default, project origin and shared (survey) origin are in the same location. When you link a point cloud file, the end event of selecting Auto - Origin to Origin and Automobile - By Shared Coordinates will be identical.

   • Car - Origin to Last Placed: Revit places the next imported point cloud consistently with the previously imported point deject. This selection becomes enabled after you insert 1 point cloud. You lot can movement this first cloud, for instance, to align information technology properly with the model elements. If yous have boosted signal clouds created on the same site and in the same coordinate system every bit the first one, it is recommended to use this option to insert the boosted point clouds. New signal clouds volition and then be correctly placed with respect to the get-go 1.
5. Click Open.

   For .rcp and .rcs format files, Revit retrieves the current version of the signal cloud file and links it to the project.

6. For raw format files, you are prompted to index the information:
   1. Click Yes to have Revit create indexed (.rcp and .rcs) files.

      The Betoken Cloud File Indexing dialog displays.

   2. If one or more text files (.txt, .xyz, .pts) are included in the list of raw format files to be indexed, the Import Units selection is available. Under Import Units, specify the units of the text format signal cloud. For all other formats, the units are detected automatically past the indexer, and this option is not available.
   3. Under File Locations:
      • For Output project file, click the Browse button, and specify the destination folder and file proper noun. (The default folder is the location of the raw data, and the default file name is the raw data file proper name with the .rcp or .rcs extension.)
      • For Temporary folder, specify the temporary directory to exist used for indexing.

        Note: If you have a Solid State Drive, make sure that the temporary folder is on this hard drive.

   4. Click Start Indexing.
   5. When the indexing procedure is complete, click Close. If you chose to index:
      • a single scan file, the indexer produces an .rcp and an .rcs file.
      • multiple files, the indexer produces multiple .rcs files, and a unmarried .rcp file that aggregates the files together.
   6. Utilize the Signal Cloud tool once again to insert the new indexed file.

The cloud is visible in all views except drafting and schedule views.

murphyveackell.blogspot.com

Source: https://knowledge.autodesk.com/support/revit/learn-explore/caas/CloudHelp/cloudhelp/2018/ENU/Revit-Model/files/GUID-B89AD692-C705-458F-A638-EE7DD83D694C-htm.html

Share this post